FAVEN Under Canopy R8 (4 bars)

🌱 Faven Under Canopy Starter Pack for LED 120x240cm - Maximize your indoor cultivation

If you want to take your cultivation to the next level, the Faven Under Canopy Starter Pack for LED 120x240cm is your best ally. With a design specifically for LED systems, this pack transforms the performance and quality of your plants thanks to strategic lighting at the bottom of the canopy.

Each kit includes 4 R8 lights, a power cable, a jumper cable, and two couplers to ensure easy and efficient installation. Accessories and supports are sold separately to adapt to the needs of each grower.

💡 Key benefits of Faven Under Canopy lights

✅ Increases yield by 20% to 30% proven real.
✅ More than 85% of users recoup their investment in a single cycle (ROI 1 run).
✅ Enhances color, density, and uniform ripening throughout the canopy.
✅ Reduces the need for excessive pruning and manual labor.
✅ Decreases the production of smalls and low-quality buds.
✅ Compatible with LED and Greenhouse cultivation systems.
✅ Certifications: ETL, DLC, CE, FCC, and 5-year warranty.

🔧 Technical features of the Faven Under Canopy Pack

• Efficiency: Up to 2.9 umol/j

• Power: Dimmable LED 120W per bar

• Durability: IP66 Waterproof

• Dimensions: 117 cm (length) x 7.4 cm (width) x 8.4 cm (height)

• Internal driver

• Voltage: 240V

🌿 Best practices and advanced technique with Faven

One of the great advantages of this system is that it's not just about installing and turning on: the key is in the technique.

✅ Intelligent pruning: Limits excessive pruning during the vegetative phase to maximize canopy depth. Leaves as many low branches as possible to increase production without compromising plant health.

✅ Post-stretching defoliation: Between days 21 and 25 of flowering, strategically defoliate by removing large fan leaves to improve light penetration, both from the upper luminaires and the Faven Under Canopy.

✅ Final defoliation: Approximately two weeks before harvest, perform a deeper cleaning to allow the plant to mature uniformly, improving density, color, and homogeneity in the buds.

✅ Height control:

• For short plants (less than 1.35 m), place the lights 20-25 cm from the substrate.

• For tall plants (more than 1.35 m), adjust the lights starting from 30 cm or more.

• If you use support structures, the recommended height is 38 to 46 cm above the substrate.

The goal is always to prevent the buds from coming into direct contact with the luminaire.

✅ Intensity control: Start with 45% light intensity in the early days of flowering and gradually increase to 100%, without rushing, to avoid light stress on the plants.

💡 Royal cultivators' advice:
Many cultivators have found that limiting traditional under-clearing and lowering the support mesh to about 2-4 cm above the lights allows better support for the additional weight of the buds. This simple adjustment results in more productive and higher quality harvests.

💬 FAQs - Frequently Asked Questions about Faven Under Canopy

✅ Can I use this kit with HPS lights?
No. For HPS crops, the Faven R6 model is recommended. This kit is specifically designed for LED and Greenhouse systems.

✅ What production increase can I expect?
Most cultivators experience between 20% and 30% increase in yield, along with a significant improvement in the visual and structural quality of the buds.

✅ Are adjustments in irrigation or fertilization required?
Yes. With the incorporation of under canopy lighting, plants will require approximately 10-15% more water and fertilizers. It is advisable to use substrate sensors to adjust these parameters accurately.

✅ How to prevent burns on the flowers?
Always maintain a minimum distance of 2.5 cm between the lights and the buds. Use well-adjusted support meshes to prevent the buds from touching the luminaires.

✅ Is the installation simple?
Yes. The Starter Pack includes everything needed for a quick installation. Additionally, Faven offers adjustable supports and clips for DIY systems, allowing for total customization according to the type of crop and available space.