Dimlux Xplore Series 730W 3.0 LED

Three point zero. That's the number that matters with the Xplore 730W 3.0. 3.0 µmol/J system efficacy at 2160 µmol/s PAR output — figures that, not long ago, you'd only find on fixtures costing considerably more.

The jump in efficacy isn't the only thing that changed from the previous version. Dimlux rethought how this fixture distributes light. The LED diodes are positioned asymmetrically, delivering up to 80% more intensity at the edges of the grow area. What that means in practice: less variation between the plant in the middle and the one in the corner, more consistent flowering across the entire footprint, and a canopy that doesn't constantly need repositioning to compensate for hot spots.

The lens is new too. Integrated Light Benders capture light that would otherwise scatter sideways and redirect it downward onto the crop. Virtually unbreakable — no glass panel to shatter during a bump or a drop — and built to hold its transmittance over time rather than degrade quietly after a couple of years.

The driver is built into the fixture itself. No external ballast, no separate box. Four power levels selectable by button: 290W, 430W, 580W and 730W. Hook it up to the Dimlux MaxiController and you get continuous variable dimming with full automation by schedule, temperature and humidity — no manual adjustments needed.

The fixture accepts UV-A and far-red add-ons from the Xplore Series range if you want to expand the spectrum down the line without replacing the main light. And the warranty steps up to 5 years from the 3-year coverage on the previous generation — worth noting, because it reflects how much confidence Dimlux is putting behind this hardware.

Features:

▸ System efficacy: 3.0 µmol/J @ 230-240V AC

▸ PAR output (400-700 nm): 2160 µmol/s

▸ Total output (350-800 nm): 2197 µmol/s

▸ Asymmetric LED layout — up to 80% more light at canopy edges

▸ Unbreakable lens with integrated Light Benders

▸ Integrated high-voltage driver — no external ballast

▸ Manual dimming: OFF / 290W / 430W / 580W / 730W + EXT (Controller)

▸ Compatible with Dimlux MaxiController and universal 0-10V controllers

▸ Expandable with Xplore Series UV-A and far-red add-ons

▸ IP68 Quick Lock power connector

▸ Rated lifetime L90: > 50,000 h

▸ Warranty: 5 years

Technical specifications:

▸ Input power: 730W @ 230-240V AC

▸ Input voltage: 200-277V AC, 50/60 Hz

▸ Spectrum: Full Spectrum white LEDs + red LEDs

▸ Beam angle: 110°

▸ Recommended mounting height: 150×150 cm footprint, min. 40 cm

▸ Max. ambient temperature: -25 ~ 40°C

▸ THD: < 10%

▸ IP Rating: IP44

▸ Certifications: CE, DLC, UKCA, CASA, ETL

▸ Dimensions: 1164 × 1063 × 38 mm

▸ Weight: 7.40 kg