Controller Clima Eco 5A - TechGrow

The Controller Clima Eco Temperature / Humidity controls the minimum speed of the fan to obtain the desired room temperature and the desired level of relative humidity (humidity probe not included). The fan control works based on the set minimum fan speed, the maximum fan speed (100%), the set temperature, the set relative humidity and the hysteresis (Temp - 2 ° C / RH - 3%)

The Clima ECO 5A controller has 3 buttons to set the minimum operating speed, the desired room temperature and the humidity level (to control humidity it is necessary to use another probe, not included).

If the room temperature is above that indicated on the controller, the extractor will turn on at 100% speed to lower the room temperature. If, on the contrary, the temperature is lower than that indicated, the extractor will operate at the minimum speed indicated on the controller.

Controls the minimum fan speed to reach or maintain the desired temperature and relative humidity

Minimum fan speed, temperature setpoint and relative humidity setpoint are saved in the event of a power failure

Temperature setting range: 15 °C –35 °C

Hysteresis temperature: 2 °C

Minimum fan speed setting range: 10% –100%

Relative humidity setting range: 40% –90%

Hysteresis relative humidity: 3%

Automatic detection of cable failure or poor connection with the sensor

2 UTP ports

Available in the version: 5A

Easy fuse replacement (spare fuse included)

Various sensors are available separately