TrolMaster RJ12 Splitter Hub (SPH-1)

The TrolMaster RJ12 Splitter Hub (SPH-1) facilitates the installation of sensors, modules, and adapters by providing a centralized and organized connection. Instead of using multiple chain splitters (Y-splitters), the SPH-1 allows you to connect up to 8 RJ12 devices in a clean and efficient manner.

The SPH-1 also has the function of boosting the signal of all connections that pass through this module, allowing you to connect as many sensors and light adapters as necessary. Using the SPH-1, you can control an almost unlimited number of LED / HID luminaires with a single TrolMaster controller.

IMPORTANT: if you use the SPH-1 to interconnect the luminaires in a single LMA adapter module (except for the LMA-T adapter and ThinkGrow luminaires), DO NOT connect the 12v dc power supply to the SPH-1

Main Features:

✔️ 📡 8 RJ12 Output Ports → Easily connect sensors, modules, and adapters.
✔️ 🔋 Powered Hub → Boosts the signal to connect more devices without loss.
✔️ 🎛️ Centralized Installation → Eliminates excessive use of daisy chains.
✔️ 💡 Compatible with LED & HID Lights → Allows expansion of lighting systems.
✔️ 🔗 Plug & Play Connection → Easy installation with standard RJ12 wiring.
✔️ 🚨 Intelligent Design → Compact and easy to integrate into any installation.

Package Contents:

1x RJ12 Splitter Hub (SPH-1) → Expand the connection capacity of your system.
1x 12V Power Adapter → Additional power for connected devices.
1x 4ft RJ12 Cable → Connection to the main controller.

Technical Specifications:

Input Voltage: 12VDC

Maximum Current: 2A

Operating Temperature: 32°-122°F (0°-50°C)

Maximum Humidity: ≤90%

Dimensions: 160mm (L) x 85mm (W) x 90mm (H)

Instructions for Use:

1️⃣ Module Installation
Place the SPH-1 in a centralized location near the TrolMaster controller.

2️⃣ Connection to the Controller
Use an RJ12 cable to connect the SPH-1 to the main controller.

3️⃣ Hub Power Supply (Only when necessary)
If you connect multiple sensors or modules, use the included 12V adapter.
⚠ Important: If you use the SPH-1 for lighting systems (except LMA-T and ThinkGrow), DO NOT connect the power source.

4️⃣ Expand Your System
Connect up to 8 devices directly to the SPH-1.

5️⃣ Monitoring and Control
Check the connection and status of the devices through the TrolMaster controller or the APP.

DOWNLOAD THE SPH-1 MANUAL FROM TROLMASTER